- Home
- Our Products
- Load Cell
- Lift Load Cell
- Electronic Load Cell Sensor Alloy Steel for Elevator Electronic Weight Overload Alarm
Electronic Load Cell Sensor Alloy Steel for Elevator Electronic Weight Overload Alarm
- General Details
- Order Inquiry
General Details
Electronic Load Cell Sensor Alloy Steel for Elevator Electronic Weight Overload Alarm
Dimension:
We have been designing and producing elevator load detector is designed for detecting the load of the elevator, It can put out switch signal and analog signal to elevator control system and inverter. This elevator load detector is composed of a control device and a weighting sensor mounted at the end of steel wire rope.
Technical Parameter:
Rated Load: | 2/10t | Input Resistance: | 760±10Ω |
Rated Output: | 2.0±0.02%m V/V | Output Resistance: | 7000±2Ω |
Total Error: | ±0.5%FS | Insulation Impedance: | ≥5000MΩ |
Repeatability: | ±0.1%FS | Safe Overload: | 150%F.S |
Creep (30min) | ±0.05FS/30min | Ultimate Overload: | 200%F.S |
Zero Balance: | ±1% F.S | Construction: | Alloy Steel, SS |
TC SPAN: | ±0.02%FS/10℃ | Protection Class: | IP67/IP68 |
Operating Temp. Range: | -30~70℃ | Citation: | GB/T7551-2008/ OIML R60 |
Order Inquiry
Contact us by email sales@goldshinechina.com or WhatsAPP 008615869588089