hydrostatic Melt Pressure Sensor &Transducer
hydrostatic Melt Pressure Sensor &Transducer
hydrostatic Melt Pressure Sensor &Transducer
Goldshine |
PT126B |
| Melt Pressure Sensor &Transducer | |
ABSTRACT:
Insulated by rigid or flex tube.Applying to pressure measuring and controlling of Rubber, Chemical fiber, Petro-chemical and other special occasions.
| Parameters: |
| Capacity Range:0-1-150MPa |
| Comprehensive Precision:0.1%FS, 0.2%FS, 0.3%FS, 0.5%FS, 1.0%FS |
| Output Signal: 2mV/V; 2.5mV/V; 3.3mV/V; 4~20mA; 0~5V; 1~5V; 0~10V |
| Use Temp Range:-10~200℃-400℃ |
| Excitation Voltage: Transducer =10V (6～12)V;Transmitter=24V (9~36)V;Transmitter=15~36V |
| Insulation Resistance: ≥2000MΩ,100VDC |
| Eletric Connection: 6 gilded pin / 5 pin |
| Thread connection:1/2-20UNF or Others |
| EXAMPLE: PT111 – 35M – 01 – C – G – 6 / 18 – J – W | ||||||||||
| PT1 | 11 | 35 | M | 01 | C | G | 6 | 18 | J | W |
| 11 | Models | |||||||||
| 35 | Capacity(Noted by number) | |||||||||
| M | Pressure Mearsure ( P=Psi, B=Bar, M=MPa ) | |||||||||
| 01 | Output Signal (01=2mV/V, 02=2.5mV/V, 03=3.3mV/V, 04=4~20mA, 05=1~5V, 06=0~5V, 07=0~10V ) | |||||||||
| C | Precision （%FS）(B=0.2, C=0.3,D=0.5, E=1.0 ) | |||||||||
| G | Thread Connection (F=M12×1,G=M14×1.5,H=1/2-20, L=M18×1.5,M=M22×1.5, N=M28×1.5, P=G3/4, Q=G3/8 ) | |||||||||
| 6 | Length of Rigid Stem( 2 =2.36“, 60mm,6=6”, 152mm) | |||||||||
| 18 | Length of Flexible Tube(18=18“, 460mm,blank= none) | |||||||||
| J | Thermcouple option (J, K, E, PT100 ) | |||||||||
| W | Electric connection(W=5pin, L=6pin ) | |||||||||
