Oem Load Cell Personal Scale Low Price Weighing and Measuring Load Cell
Oem Load Cell Personal Scale Low Price Weighing and Measuring Load Cell
Oem Load Cell Personal Scale Low Price Weighing and Measuring Load Cell
Dimension:
| Cap. | A | B | C | D | E | M |
| 0-5N-30N | 16 | 19.1 | 5 | 6.7 | 17 | M3 Depth 3 mm |
| 0-50N | 16 | 19.1 | 6 | 7.5 | 17 | M4 Depth 3 mm |
Note:
1:Screws should not be screwed too deep and shall not exceed 4 millimeters. You should not touch the middle part of the sensor so as not to affect the measurement result.
When the
2:Sensor is installed, the two sides of the cover plate can not be contacted with the middle cylinder, so as to avoid measuring the result
| Capacity | A | B | C | M |
| 0-100N-500N | 16 | 19.1 | 6 | M4 Depth 3 mm |
| 0-200N-2KN | 26 | 40 | 12 | M8 Depth 8 mm |
Note: screws must not be screwed too deep when they are installed. You should not touch the middle part of the sensor so as not to affect the measurement result.
Description:
Ultra small installation size, width of only 5 mm, height of 19.1 mm; high speed dynamic response output, high accuracy; measuring force: internal thread tension or compression direction. Widely used in automatic force detection, typical applications: key detection.
Technical Data:
| Capacity | 0-5N~2000N | Material | Stainless Steel |
| Rated output | 2.0 ±10% mV/V | Output Impedance | 350±3Ω |
| Non-linearity | 0.05 % F.S. | Insulation | >5000MΩ/10VDC |
| Hysteresis | 0.05 % F.S. | Recommended Excitation | 2.5-5V |
| Repeatability | 0.05 % F.S. | Excitation max | 10V |
| Creep(30min) | 0.05 % F.S. | Compensated Temp Range | -10~60℃ |
| Temp Effect On Output | 0.1 % F.S./ 10℃ | Operating Temp Range | -20~80℃ |
| Temp Effect On Zero | 0.1 % F.S./ 10℃ | Safe Load | 1.2 |
| Protection Class | IP 65 | Ultimate Load Limit | 1.5 |
| Input Impedance | 350±15Ω | Cable Length | ∅2-3 x 3m |
| Wire Connection | Ex +: Red; Ex -Black; Sig +: Green; Sig -: White
(Pressure is positive, pulling is negative); |
||
