Tension Dyna Link Crane Scale Load Cells wireless crane scale

Tension Dyna Link Crane Scale Load Cells wireless crane scale

SKU: LC209 Category:

Tension Dyna Link Crane Scale Load Cells wireless crane scale

Load Cell Special For Crane Scale

Tension Load Cells

Dimension:Unit: mm

Force Sensing Tension Link

Cap/Size L L1 H H1 W D
2t/3t/5t 227 147 70 68 40 28
10t/15t 340 210 100 75 50 38
20t/30t 340 210 100 75 50 54


1:Plate-ring load cell are installed in the side by a fixed rope, etc. to measure tension of a load cell, its bottom two holes through the pin, hanging panels, with wire rope connected to form a taut state, to measure the pull rope .

2:Such products are mainly used for electric hoist and load cell not easy installed on the crane.

3:Alloy Steel,Stainless steel construction, corrosion resistance and anti-rust performance, applicable to a variety of harsh environments.
4:High precision, used for overload protection, while the weight can be accurately measured.

Tension cell module

Technical Parameter:

Rated Load: 2/3/5/10/15/20/30t
Sensitivity: (1.5±0.1%) mV/V Operating Temp. Range: -30~+70℃
Combined Error: ±0.05% F.S Maximum Safe Over Load: 150%F.S
Creep Error(30min): ±0.03% F.S Ultimate Over Load: 200%F.S
Zero Balance: ±1% F.S Recommend Excitation Vol.: 10~12V DC
Temp. Effect On Zero: ±0.05% F.S/10℃ Maximum Excitation Vol.: 15V DC
Temp. Effect On Span: ±0.05% F.S/10℃ Sealing Class: IP67
Input Resistance: 385±5Ω Element Material: Alloy Steel/ Stainless Steel
Output Resistance: 350±2Ω Cable: Length=L:3m
Insulation Resistance: ≥5000MΩ Citation: GB/T7551-2008/ OIML R60
Mode Of Connection: Red(Input+),Black(Input-),Green(Output+),White(Output-)
Text Widget
Aliquam erat volutpat. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Integer sit amet lacinia turpis. Nunc euismod lacus sit amet purus euismod placerat? Integer gravida imperdiet tincidunt. Vivamus convallis dolor ultricies tellus consequat, in tempor tortor facilisis! Etiam et enim magna.