- Home
- Our Products
- Pressure Transducer Sensor
- Transmitters for High Temperature Transducers & Pressure Sensors
Transmitters for High Temperature Transducers & Pressure Sensors
Transmitters for High Temperature Transducers & Pressure Sensors
Goldshine |
PT05 |
PT05 Pressure Transmitters for High Temperature |
Description:
Model PT05 pressure transmitters for high temperature the amplifier circuit is isolated by using temperature heat sink. While maintaining the small volume and low cost make the transmitter further improvement measure medium temperature range and amplifying circuit due to the effect of isolation trench is influenced by temperature. To ensure the measurement is higher at medium temperature transmitter of stability and durability.
Features:
◎Designed for high temperature and medium pressure;
◎Circuit part adopts temperature isolation;
◎Medium temperature up to 250℃;
◎Keep a small volume and low cost.
Technical Data:
Measuring Medium | Compatible with 17-4 ph stainless steel of gas and liquid | |
Measuring Range | -100Kpa~0~10Kpa…120Mpa | 0~1…60Mpa |
Pressure References | Gaugeabsolutesealed gauge | Gauge |
Proof Pressure | 150%FS | |
Burst Pressure | 200%FS | |
Power Supply | 16~32VDC(rang<100Kpa);9~30VDC(rang≥100Kpa) | |
Output Signal | 4~20ma;0~5V optional | |
Accuracy | ±0.5%F;±0.25%FS optional | |
Temperature Coefficient Of Zero | ±0.2%FS/10℃ | |
Temperature Coefficient Of Span | ±0.2%FS/10℃ | |
Compensated Temperature Range | -20~85℃ | |
Operating Temperature Range | -40~150℃ | -40~250℃ |
Insulation Resistance | ≥500MΩ | |
Load Resistance For Current Loop | ≥[(vs-6.5V)/0.02A]Ω | |
Mechanical Interface | G1/4″; M20×1.5;M14×1.5 special thread can be customized |
|
Electrical Interface | DIN,aviation plug,spring direct optional | |
Life Time | ≥5million times cycles | |
Long-Term Stability | ≤±0.25%FS/year |
Dimension:
PT05-1 0~150℃ | PT05-2 0~250℃ |